How to fix a leaking washer
How to fix a leaking washer ? A leaking washing machine can be a real headache: it wastes water, makes a mess, and leaves your clothes far from clean. Fortunately, the Experts at Riyadh Repair Center have extensive experience handling major appliances, so they know exactly what it takes to get your washer running smoothly again. If you keep ending up with soggy laundry instead of properly washed clothes, their guide can help you troubleshoot and fix the issue.
How to stop your washing machine from leaking water
How to fix a leaking washer
Here are a few helpful tips to resolve common problems that often lead to leaks in your washer.
Secure or replace the hose clamp
Look for the clamp that connects your washer’s drain hose to the drainage pipe. If this clamp is loose or missing entirely, it could be the cause of the leak. Make sure it’s tightened or replaced to prevent water from escaping.
Swap out the tub seal
Does your washer leak mainly during the rinse cycle? If so, the tub seal might be worn out. Fixing this part usually requires flipping the machine over and disassembling some components, so it’s a good idea to contact a professional appliance technician for assistance.
Clean the filter
Your washing machine’s filter—sometimes called a catch basket—is designed to trap debris and prevent it from clogging your system. You’ll typically find it near the drum’s edge, though some machines also have a small screen located at the end of the drain hose. Be sure to check and clean both areas regularly to avoid buildup and leaks.
Ensure your washing machine is level
When your washer isn’t properly balanced, it can vibrate aggressively during the spin cycle. This excessive movement can cause water to escape onto your floor. Use a spirit level on top of the machine to see if it’s sitting evenly. If it’s not, adjust the feet until it’s stable. For older models that don’t have adjustable feet, consider picking up anti-vibration pads from a local hardware store.
How to fix a leaking washer
Check or replace the coupler
The coupler connects the motor to the washer drum and helps with draining and spinning. If your clothes are still soaked at the end of the cycle, the washer isn’t draining, or there’s water leaking from underneath, the coupler may be damaged. It’s built to break if something goes wrong, acting as a fail-safe. Thankfully, it’s usually a straightforward part to replace.
Replace the water pump
How to fix a leaking washer? Leaks underneath your washing machine are often traced back to a faulty water pump. To check, inspect the area below the pump for signs of moisture. It could also be a loose clamp or cracked hose attached to the pump. Ensure all connections are tight and intact. If the pump itself is leaking or broken, it’s best to schedule a repair with a qualified technician.
How to fix a leaking washer
Why is water leaking from the bottom of my front-load washer?
Front-load washing machines are susceptible to the same leaking issues as top-load ones. However, they can be more likely to leak if they’re not properly leveled. If off-balance, they’ll rock and shake during the cycle, causing water to spill—often from the front door, but it can seem like it’s coming from underneath. Always double-check the leveling and positioning to prevent this.
Should I fix or replace a leaking washer?
Many washer leaks can be solved with basic fixes—tightening hoses, leveling the machine, or cleaning the filter. However, more serious problems, like a damaged water pump or worn tub seal, often need professional repairs. If your washing machine is over 10 years old and facing multiple issues, investing in a new unit may be more cost-effective. And don’t forget to look into protection plans for your next machine.
How to fix a leaking washer